Q-Floor/Taproute System oofers capacity for current and future wiring needs. Accomodate all high and low-voltage cabling.
Associated Terms: communication wire management, low voltage cabling, electrical outlet box, wire raceways, cable wireway, electrical outlet boxes, infloor raceway system, infloor systems, LAN cabling raceways, cable management duct, raceway wiring, surface raceways
low voltage cable raceways and cable wireway, infloor raceway system, infloor systems, LAN cabling raceways, cable management duct, raceway wiring, surface raceways

Q-Floor/Taproute System. Capacity for Current and Future Wiring Needs

A properly planned electrical/communications distribution system must accommodate all current high- and low-voltage cabling, while maintaining the additional capacity to handle emerging technologies such as fiber optic cables. The Q-Floor/Taproute System can handle these requirements easily, assuring you of capacity for the future.

Pre-punched Holes

(click to zoom)
 With Q-Floor's nine pre-punched holes at the trench-cell interface, cable routing and/or bending radii requirements can be easily accommodated. Wires can enter and exit a cell in either direction without doubleback bending.
Trench Header

(click to zoom)
 The Tapway™ bottomless trench has the capacity to feed large floor areas from separate high- and low-voltage wire compartment cells. Access holes are always punched at the neutral axis to maintain optimum structural strength.
Tapmate V Outlet Box

(click to zoom)
 The Tapmate(tm) V preset outlet box offers 325 cu. In. of interior space - the largest available for cellular floors. This outlet box can accommodate four duplex power receptacles plus up to 24 low-voltage ports.

back